Annual Maintenance Plans
Most repairs start as a small issue that went unnoticed. An Annual Maintenance Plan puts routine, scheduled checks in place across your plumbing, electrical, and HVAC systems in Dubai, so problems get caught and fixed while they’re still small — not after they’ve caused damage or downtime. Plans are available for both residential and commercial properties, with the scope and visit schedule built around which one you are.
Why Preventive Maintenance Pays Off
A blocked drain or a loose electrical connection found during a routine visit is usually a quick, low-cost fix. The same issue left unnoticed for months can mean water damage, a bigger repair bill, or a system failure at the worst possible time. Scheduled maintenance is how you stay ahead of that.
- Small issues caught early — regular checks catch wear, leaks, and faults while they’re still minor, before they turn into an expensive repair or an emergency callout.
- One licensed partner, three trades — the same team that already knows your property handles plumbing, electrical, and HVAC, instead of juggling separate contractors.
- A written record of every visit — you get a clear account of what was checked and what was found, useful for your own records or for a facility manager’s compliance needs.
- Inspection-led, every visit — every visit follows the same inspection-first approach as any other Shield Edge job — we check actual condition, not just tick a box.
Built for Dubai’s Climate
Heat, humidity, and dust put more strain on a property’s systems here than in milder climates. AC units run harder and longer, electrical fittings are more exposed to moisture ingress, and plumbing fixtures see more use through the summer months. Given the climate, most systems benefit from more frequent servicing than the manufacturer’s minimum — a maintenance plan is how that happens automatically, on a schedule, instead of relying on you to notice something’s off.
Residential vs. Commercial: What’s Different
For Homes & Villas
Peace of mind without the disruption of managing tradespeople yourself. Visits are scheduled around your routine, and one plan covers plumbing, electrical, and HVAC instead of three separate call-outs from three different companies.
For Businesses & Facility Managers
Less downtime and one contract instead of separate vendor relationships per trade. Scales across multiple units or sites, with consistent documentation from every visit for your own records or compliance needs.
What’s Covered
Scheduled checks across the three trades most likely to develop small, quiet problems between visits.
Plumbing Maintenance Checklist
Routine checks on pipework, drainage, and fittings to catch issues before they turn into leaks.
- Inspect exposed pipework and fittings for early signs of wear, corrosion, or leaks
- Test drainage flow and clear early-stage blockages
- Check bathroom and kitchen waterproofing seals and sealant condition
- Inspect roof plumbing penetrations and flashing where accessible
- Check taps, valves, and connections for drips or corrosion
Electrical Maintenance Checklist
Safety checks, wiring inspections, and fittings to catch faults before they become bigger problems.
- Inspect wiring, connections, and fittings for wear or looseness
- Test circuit load and breaker performance
- Check sockets, switches, and lighting fixtures for faults
- Inspect fittings for signs of moisture ingress
- Confirm continued compliance with DEWA safety standards
HVAC & Air Conditioning Maintenance Checklist
Filter, coil, and drain-line checks, plus airflow and refrigerant inspection, so small faults don’t turn into a breakdown in summer heat.
- Clean or replace filters and check coil condition
- Clear and test condensate drain lines
- Check refrigerant levels
- Test airflow and overall system performance
- Inspect for unusual noise or vibration indicating wear
Roof Waterproofing & Heatproofing? Already Included.
These two trades don’t need a separate plan — every roof waterproofing and heatproofing job already includes a free annual check-in as part of the 10-year workmanship warranty. See how that works on our Warranty page.
How a Maintenance Plan Is Priced
Every plan is scoped to the property, not sold off a price list. Cost depends on:
- Property size and number of systems to cover
- Whether you’re covering one trade or all three
- Visit frequency — quarterly, bi-annual, or annual
- Residential or commercial scope
Three starting points, tailored from there:
Single Trade
One-Trade Plan
Choose plumbing, electrical, or HVAC
From AED 1,500/year
- Scheduled visits for one trade
- Full inspection checklist for that trade
- Written record after every visit
- 12-month warranty on any repair carried out
Most Comprehensive
Full Coverage Plan
All three trades, one schedule
From AED 3,500/year
- Plumbing, electrical & HVAC on one combined schedule
- One contract, one point of contact, one invoice
- Full inspection checklist across all three trades
- 12-month warranty on any repair carried out
Commercial
Multi-Site & Facility Plan
Offices, warehouses & portfolios
- Scope and visit frequency built around your operation
- Consistent documentation across every site
- Single point of contact for multiple properties
- 12-month warranty on any repair carried out
The prices above are starting points for a typical villa. Every plan is quoted after an on-site assessment of your property — get in touch for a tailored price.
Need a plan? Let’s talk.
How It Works
Setting up a plan follows the same clear process as any other Shield Edge job.
1
Contact Shield Edge
Call, WhatsApp, or use our enquiry form to set up a plan for your property.
2
Property assessment
We inspect your plumbing, electrical, and HVAC systems to understand what’s there and agree the right scope and visit schedule.
3
Plan agreement
We confirm trades covered, visit frequency, and pricing in a clear agreement before anything starts.
4
Ongoing scheduled visits
We carry out checks on schedule, fixing small issues as we find them. Repairs carries our usual 12-month workmanship warranty.
Frequently Asked Questions
Straight answers to the questions we hear most about maintenance plans.
An Annual Maintenance Plan is a scheduled service agreement covering plumbing, electrical, and HVAC systems at your property. Instead of waiting for something to break, a technician visits on an agreed schedule to inspect, clean, and catch small problems before they become repairs.
Both. We offer maintenance plans for residential and commercial properties, including facility-managed sites — the scope and visit schedule are tailored to which one you are.
Plumbing, electrical, and HVAC — either individually or together on one combined plan. Roof waterproofing and heatproofing already include a free annual check-in as part of the 10-year warranty, so they’re not part of a separate plan.
It depends on your property’s size, how many trades are covered, and how often you’d like visits. Like all our pricing, it’s based on an on-site assessment rather than a flat rate.
You choose the cadence that fits your property — quarterly, bi-annual, or annual — and we’ll recommend what makes sense for your systems during the initial assessment.
Contact us the same way you would for any repair — call, WhatsApp, or use our enquiry form. Maintenance plan visits are for prevention; if something fails in between, it’s handled as a normal callout, quoted and warrantied the same way.
Not as part of this plan — those two trades are already covered by a free annual check-in built into the 10-year workmanship warranty. See the Warranty page for how that works.
Yes. Any repair carried out during a scheduled visit carries the same 12-month workmanship warranty on the specific problem fixed as any other Shield Edge repair.
Get in touch and we’ll sort it out. The same cancellation terms on our Payment Terms page apply to maintenance plans.